How To Install Window Blinds In Indianapolis

Countless Indianapolis residents choose window blinds when they want more privacy and control over daylight in their properties. They’re a practical and budget-friendly window covering. Skilled DIYers can also install them in a handful of steps. But, nothing is better than choosing a professional window treatment installer. Here are the essential steps of putting up window blinds and when to call the professionals to do it for you.

Get Precise Measurements

Before you start, determine if you want outside-mount or inside-mount blinds. This critical bit of info will tell you where to measure. Take measurements of the height, depth, and width inside your window frame for inside-mount options. When attaching outside-mount blinds, measure the width and height of your window, which includes the trim, and then increase your measurements by three inches to make sure you have adequate coverage. Measure with precision–refrain from rounding up or down. Ill-fitting blinds will not operate smoothly.

Shop For Blinds

Once you get your measurements, you are ready to choose your blinds. You probably know what style of blinds you wish to have. Pick blinds that are as even with your measurements as possible. Off-the-rack blinds often won’t fit exactly, either jutting out too far or not meeting the end of the window entirely. Ensure you are provided hardware that permit you to hang the blinds at the appropriate depth, as well. You’ll need to choose custom-made blinds and parts for a superior fit.

Install Your Blinds

Your blinds might be accompanied by instructions. Use them to affix your particular product. If you want a sample of how challenging it is to install window blinds in Indianapolis, here are several common steps to provide a general idea.

 

Inside Mount Blinds

 

1. Put a bracket at the top of the window’s frame approximately one inch from the side. Ensure this positioning won’t obstruct the blind’s operation. Use a pencil to designate the bracket holes.
2. Drill pilot holes in the indicated areas.
3. Situate the bracket holes where you drilled and fasten with screws.
4. Duplicate the initial three steps for the second bracket.
5. Snap the end caps onto the blind’s top rail. Fit the rail into the brackets.

Attach the tilt wand and try it out. In addition, try out the pull cord.

Outside Mount Blinds

1. Decide if you’re mounting on the window trim or wall above the window. Hold up the headrail and make sure the blind covers the bottom of the window.
2. Mark the outer edges of the headrail.
3. Measure four inches from both headrail marks and mark here for the screws.
4. Drill pilot holes as indicated.
5. Align the bracket openings with your wall holes and secure with screws on both sides.
6. Fit the blind rail into the brackets.

Attach the tilt wand and test to ensure everything works.

Opt For The Simplest Way To Install Blinds 

Of course, you don’t have to put up blinds yourself. The simplest way to install window blinds in Indianapolis is to seek out an expert window treatment installer. They will guide you at every step of the process. They’ll help you find blinds that match your requirements, make exact measurements for a custom product, and attach them for you. They do this every day, so they’ll handle your job swiftly and precisely. They’ll know how to troubleshoot any concerns without wasting hours looking for help online. A window treatment specialist will also have higher-quality blinds than online or box stores.

Avoid The Trouble And Have Sunburst Shutters Install Your Window Blinds In Indianapolis

Upgrading to new window blinds in Indianapolis couldn’t be simpler when you consult with Sunburst Shutters Indianapolis. We’ll help you choose made-to-order blinds that will match your windows perfectly, and our professional installation staff will affix them for you. All you have to do is contact 317-558-9066 or fill out the following form to arrange a free in-home consultation.